Design & Development Of Oil Disposal System For Grease Trap Using PUGH Method

Thankadurai, Raaja Panndiyan (2017) Design & Development Of Oil Disposal System For Grease Trap Using PUGH Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text (24 Pages) Design & Development Of Oil Disposal System For Grease Trap Using PUGH Method.pdf - Submitted Version Download (396kB)

Abstract

Nowadays in small restaurants, the problem of pipeline clogging often arises, causing trouble in the cooking station. At the same time, it also causes the drainage system to pollute and results in big loss to them in term of money and time. Concurrently, they have to clean the oil in the grease trap, so this is the reason for this project to be conducted. This project is to remove the FOG from waste water and with automatic oil disposal system. The purpose of this project is to design and develop the oil disposal system for grease trap by using Pugh method to avoid pipe clogging, drain system pollution and dispose oil automatically. In order to ensure the objective is reached, the grease trap was designed using Pugh method. Then, mild steel was selected as the frame of the grease trap. To trap the solid particles from the waste water is by using the sponges and the filter in the grease trap. Then the oil with less density will float on the water which has high density and the oil will flow to another partition. Once the oil in that partition is filled, the oil will be dispose oil to the container. The water will flow out through the output pipe line.

Actions (login required)

View Item