Preventive maintenance (PM) system applying at JTKP's labs

Che Ku Abdul Majid , Che Ku Ariffin (2015) Preventive maintenance (PM) system applying at JTKP's labs. Project Report. UTeM. (Submitted)

Text PREVENTIVE MAINTENANCE (PM) SYSTEM APPLYING AT JTKP’S LABS.pdf Download (240kB)

Abstract

This project desribes about the application of Preventive maintenance (PM) on the milling machine and lathe machine. As a preference, this project has be held at the JTKP’s Labs in Universiti Teknikal Malaysia Melaka (UTeM). Many of labs do not have proper scheduling of maintenance. This situation will lead cost of maintenance system for all machine, tool and equipment will be increase. Some of labs have maintenance system but do not document properly the maintenance documentation. The type of machine used in this reaserch is Vertical/Horizontal Milling machine (Full Mark) and Metal Turning Lathe machine. The purpose and main objective of this project was to study the process of Preventive Maintenance (PM) for milling conventional and lathe conventional at JTKP labs which is to find the advantage and benefit use Preventive Maintenance (PM), to document a daily, weekly, monthly and annually and then make improvement schedule for all labs and then to investigate before and after apply total preventive maintenance. This Preventive Maintenance (PM) will be held at JTKP’s Labs due on company do not have preventive maintenance system which should performed periodically to reduce the incidence of equiment failure. In this research, fuguai mapping technique is use to eliminate the abnormalities following with development of standard maintenance check sheet to enhance the machine perform. Research has been done before and after the machine was used. At the end of this reserch, the maintenance application was used which the Preventive Maintenance has been documented and recorded based on standard as reference later. Thus, the Preventive Maintenance keep the milling and lathe machine more clean, equipment and facilities will be systematic, equipment failure will decrese and also makes the machine always in good condition and preventing the machine becomes breakdowns.

Actions (login required)

View Item