Preparation Of Recycling Chip Aluminium (Al 6061) Through Powder Metallurgy Route

Nur Suhaila, Muhammad (2013) Preparation Of Recycling Chip Aluminium (Al 6061) Through Powder Metallurgy Route. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Preparation_Of_Recycling_Chip_Aluminium_(Al_6061)_Through_Powder_Metallurgy_Route.pdf - Submitted Version Download (158kB)
	PDF (Full Text) Preparation_Of_Recycling_Chip_Aluminium_(Al_6061)_Through_Powder_Metallurgy_Route.pdf - Submitted Version Restricted to Registered users only Download (1MB)

Abstract

This report presents the preparation of recycling chip aluminium through the powder metallurgy route. The raw materials that have been used are aluminium 6061. One of the key requirements in doing this project is to evaluate the performance of aluminium chips with different speed of planetary ball mill. Samples were grind with three different rate of rotation speed which is 100, 150, and 200 rpm for an hour. Another key requirement is to analyze the effect of different temperature towards the hardness of recycling chips. Since sample increase it hardness after been treated to the heat, three different sintering temperatures will be introduced starting with 500, 550, and 600 oC for 40 minutes. In order to get which sample has better properties, each sample will be testing mechanically to investigate its density, and hardness strength properties of each sample. At the same time, all these samples are being analyzed to obtain its size distribution and microstructure after being sintered by using Particle Size Analyzer (PSA) and Optical Microscope (OM).

Actions (login required)

View Item