Application Of Facility Layout Software : Case Study At Isuzu Hicom Malaysia

Mohamad Mukhlis, Abu Bakar (2010) Application Of Facility Layout Software : Case Study At Isuzu Hicom Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Application_Of_Facility_Layout_Softrare_Case_study_At_Isuzu_Hicom_Malaysia_-_24_Pages.pdf - Submitted Version Download (580kB)
	PDF (Full Taxt) Application_Of_Facility_Layout_Softrare_Case_study_At_Isuzu_Hicom_Malaysia_-_Full_Taxt.pdf - Submitted Version Restricted to Registered users only Download (2MB)

Abstract

This report focused on the optimization of facilities layout in an automotive factory using CRAFT method. CRAFT is one of the earliest layout algorithms presented in the literature and used commonly to solve layout problem. CRAFT significantly can increase the productivity when applied while layout planner simultaneously improves the quality of the final solution by generating and numerically evaluating a large number of layout alternative in short span of time. The main purpose of doing this study is to select and identify the tools to solve the facility layout problem before designing the new improvement layout. The scope of this project is the facility layout and the distances. In order to conduct this study, the methodologies used are based on the objectives and it will be done at Isuzu Hicom Malaysia. In these repot the comparison across the new proposed layouts with the current layout shows that the higher difference of the flow distance is contributed by the new layout 3 where the difference in flow distance travel is 109.48meter

Actions (login required)

View Item