Optimization Of Measurement Parameters In Non-Contact Measuring System

Mohd Kamarul Nizam, Abdul Hamid (2009) Optimization Of Measurement Parameters In Non-Contact Measuring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Optimization_Of_Measurement_Parameters_In_Non-Contact_Measuring_System.pdf - Submitted Version Download (3MB)
	PDF (Full Text) Optimization_Of_Measurement_Parameters_In_Non-Contact_Measuring_System.pdf - Submitted Version Restricted to Registered users only Download (5MB)

Abstract

In non contact measuring system, optimizing the parameters is a one of the most important role that may affect the results of measurement. Based on the necessity, this study is conducted. The purpose of this study is to optimize the measurement parameters in Charge Couple Device (CCD) camera. This study also being carried out to perform an analysis of the camera calibration data and at the mean time, optimizing the parameter required for CCD camera. This study will begin with the introduction and understanding of the title, objectives and problem statement that been faced in measured product. In literature review section, student will review about methods of calibration in understanding the parameters that will be used and other influences that affect parameters performance. Based on the information in literature review, the parameters that involve in measurement by using CCD camera will be listed. There are six types of parameters involve which are focal length, principal point, skew coefficient, distortion, rotation and translation. Based on result and analysis, parameters optimization depends on the distance between object and camera, also position of the object. An addition, in optimization of CCD camera parameters, lighting systems also should be considered.

Actions (login required)

View Item