PC-Based Power Failure Monitoring With SMS Notification

Ng , Thian Loon (2009) PC-Based Power Failure Monitoring With SMS Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) PC-Based_Power_Failure_Monitoring_With_SMS_Notification_Ng_Thian_Loon_TJ223.M53.N47_2009_24.pdf - Submitted Version Download (6MB)
	PDF (Full Text) PC-Based_Power_Failure_Monitoring_With_SMS_Notification_Ng_Thian_Loon_TJ223.M53.N47_2009_FULL_TEXT.pdf - Submitted Version Restricted to Registered users only Download (51MB)

Abstract

PC-based power failure monitoring with SMS Notification is a system created to monitor and control a power system by sending a specific Short Message Service (SMS) from a cell-phone. The objective of this system is to monitor power failure within an electrical device via SMS notification when detection on failure of power point. To achieve the objective, LabVIEW is used to design a virtual instrument for front panel. By using the design panel, a number of parameter such as voltage, current, power, indicator for faulty power point and the reference cell phone numbers can be display on the screen of PC for monitoring purpose. Upon to it, all power points can be control by the design front panel with SMS notification at a same time. This system is extremely handy and convenience to operate at any place by controlling the ON and OFF switching of the devices. To implement this, a GSM modem is connect to Lab VIEW front panel to receive the SMS from a reference cell phone. The utilization of GSM modem in this project as it ubiquity standard which enable subscribers to use their phones in many parts of the world, and make international roaming very co=on between mobile phone operators. The Lab VIEW progra=ing in the PC can be used to monitor and transmit controlling signals to the modem by connect a serial co=unication port RS232 between GSM modem and PC. AT command is used to control the function of the modem. Apart from that, data acqnisition module is used for real time monitoring and interfacing between hardware and software. Then, the physical value was converts to the readable data by front panel. For future application, this system would be applied to laboratory and it will benefit to technician, students by upgrading the quality of! earning in university.

Actions (login required)

View Item