Heat Transfer To Fluids In Laminar Flow Through Ducts

Mohd Khairi , Abdullah (2008) Heat Transfer To Fluids In Laminar Flow Through Ducts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Heat_Transfer_To_Fluids_In_Laminar_Flow_Through_Ducts_-_Mohd_Khairi_b_Abdullah_-_TJ263.M53_2008_24_Pages.pdf - Submitted Version Download (672kB)
	PDF (Full Text) Heat_Transfer_To_Fluids_In_Laminar_Flow_Through_Ducts_-_Mohd_Khairi_b_Abdullah_-_TJ263.M53_2008.pdf - Submitted Version Restricted to Registered users only Download (3MB)

Abstract

The study of the heat transfer to fluids in laminar flows through ducts was done at Universiti Teknikal Malaysia Melaka. The duct that was use is the study was circular and square duct. The geometry of both of the ducts was design by using Solidworks software. The aim of the study is to study the velocity and pressure profile of the ducts. In this study, a lot of study had been done about the laminar flow, Reynolds number, continuity equation and the duct geometry. After all the study had been done, simulation by using the Ansys CFX software was done to complete this study. From this study the result from CFD Simulation had been compared to the analytical data. The data from CFD Simulation and Analytical Data were almost same. The result also had shown the pressure drop from intake to outlet. The velocity increase due to the pressure drop occurred. Ansys CFX is successfully to simulate the air flow through the duct.

Actions (login required)

View Item