Automated Water Pouring System Using 68000 Microprocessor Controller

Hadifnafila, Selamat (2009) Automated Water Pouring System Using 68000 Microprocessor Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Hadifnafila_Binti_Selamat-24_pages.pdf - Submitted Version Download (743kB)
	PDF (Full Text) Hadifnafila_Binti_Selamat.pdf - Submitted Version Restricted to Registered users only Download (9MB)

Abstract

'Automated Water Pouring System Using 68000 Microprocessor Controller' is a system based on water filJing machine which is controlled by microprocessor 68000. It is a suitable system to use with any size of water container that in range of 1 OOml to 2 liters. This system can be functioning when users press the start button. The motor is used to move the 'base container', up and down refer to the type of running process. However, the motor will start to be functioning when a using container is sensed by a sensor at base container. The movement distance of base container and the time required for filling or pouring process to the container is based on it size. Liquid valve is used to control the water pouring process. After complete the water pouring process, another same process cannot be allowed if the container is not removed by the users. Then, another water container can be replaced for the same process .This process will be functioning continuously until the users press the stop button for-ending process.

Actions (login required)

View Item