Motorcycle Anti-Theft System

Muhamad Alif , Abu (2010) Motorcycle Anti-Theft System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 pages) Motorcycle_Anti-Theft_Syatem_24_pages.pdf - Submitted Version Download (304kB)
	PDF (Full Text) Motorcycle_Anti-Theft_Syatem_-_Full_Text.pdf - Submitted Version Restricted to Registered users only Download (1MB)

Abstract

This project is about motorcycle anti-theft system which is a system that can prevent a motorcycle from being stolen. Alarm systems that have in the market nowadays are very sensitive and make many false alarms. Also, the current system, use a vibrate sensor or shock sensor as a main sensor. The false alarm will increase because if anyone touches the motorcycle, the alarm will trigger easily even though they do not have any senses of stealing. So, by doing this project, the motorcycle anti-theft system will reduce the false alarm as main objective. To do so, first is a research about the alarm system for motorcycle was done. The main component in the alarm circuit and sensor that will be used to achieve the objective was studied. After that, the circuit was constructed and the testing was done to make sure the system is running well. In this motorcycle anti-theft system, the main sensor is mercury tilt sensor. This system will trigger when the mercury touch their two lids and the buzzer will ON. The mercury tilt sensor will place on the bike’s center stand, side stand and on the handle. For the best result, is on the double stand because the change of degree for the mercury can be more accurate at the double stand. Then, the alarm will just trigger when the stand is lift up or the handle is being turn out. From this method, it will reduce the false alarm.

Actions (login required)

View Item