Fiber Fault Detection And Fiber Line Monitoring Using IoT For FTTH

Zainul Ariffin, Muhammad Ridwan (2018) Fiber Fault Detection And Fiber Line Monitoring Using IoT For FTTH. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text (24 Pages) Fiber Fault Detection and Fiber Line Monitoring Using IoT for FTTHM.pdf - Submitted Version Download (285kB)

Abstract

Optical fiber communication is widely used for transmits the internet data with specific data rates for this country. The optical fiber cable can be damage and get faulty due to too long in underground cable or the cable is needed to change with the new for getting good connection. Besides, there is a needed to detect the faulty and monitoring the line condition of optical fiber communication. This project were using an intelligent fault detection system using Arduino UNO same as like optical fiber communication. The idea is this fault will detect and monitor the received power supply in optical fiber while receiving voltage supply for Arduino UNO. This project were using Arduino UNO which consists of Atmega 328 microcontroller with the sensor unit to detect and monitoring the voltage supply. The output of the sensor is designed for the hardware to monitor the received voltage supply for the line connection. The sensor unit is used for the hardware consists of a LDR through with an operational amplifier. Therefore, if there are any changes in voltage supply for the line connection, the fault message will detect and displayed on the LCD which is interfaced with Arduino UNO and at the same the data and time of fault will be transferred to the IOT for the monitoring.

Actions (login required)

View Item