Optimization parameter of boron tool wear with surface texture for AISI 1018 low carbon steel in wet turning process

Zulkafli, Muhammad Rahdi (2018) Optimization parameter of boron tool wear with surface texture for AISI 1018 low carbon steel in wet turning process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

	Text (24 Pages) Optimization Parameter Of Boron Tool Wear With Surface Texture For AISI 1018 Low Carbon Steel In Wet Turning Process.pdf - Submitted Version Download (891kB)
	Text (Full text) Optimization parameter of boron tool wear with surface texture for AISI 1018 low carbon steel in wet turning process.pdf - Submitted Version Restricted to Registered users only Download (3MB)

Abstract

This project was carry out to determine the significant factor of parameter that influence the boron tool wear based on the surface texture design. The machining process was performed on the CNC turning machine by using the boron cutting tool insert with surface texture and the material that use is AISI 1018 low carbon steel. Besides that, the aim of this project is to optimize the parameter of boron cutting tool wear insert by utilizing the Taguchi method. The selection of parameter are surface texture, feed rate and spindle speed. The type of surface texture are perpendicular, eclipse and wavy. Then, value of feed rate that selecting are 0.04mm/ min, 0.06 mm/min and 0.08 mm/min. Besides that, the spindle speed are 400 rpm, 450 rpm, and 500 rpm. The experimental design by using L9 orthogonal array with 3 level and 3 factor. The experiment was conduct which three trial. The data was obtain by using SMZ 745T Optical Microscope. The Minitab software was use to analyses the data that get based on Taguchi design.

Actions (login required)

View Item