Standard Minimum Thickness Of A Commercial Available Polypropylene And Polycarbonate Of A Name Card Holder

Norizan, An'nisa (2017) Standard Minimum Thickness Of A Commercial Available Polypropylene And Polycarbonate Of A Name Card Holder. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Text (24 Pages) Standard Minimum Thickness Of A Commercial Available Polypropylene And Polycarbonate Of A Name Card Holder.pdf - Submitted Version Download (246kB)

Abstract

The current thickness of the plastic name card holder is not standardize and most of the name card holder’s thickness are range from 2.0mm to 5.0mm.The project focused on the design and analysis of the Name Card Holder which to determine the standard minimum thickness of the Name Card Holder.The design of the Name Card Holder was designed by using CATIA software and the analysis of the Name Card Holder was designed by using Moldflow software.The material used for the Name Card Holder is Polypropylene and Polycarbonate.This project started by measuring the dimension of the actual size of the Name Card Holder.After that,a 3D drawing was created by using CATIA software.Moldflow analysis was conducted to determine the result for every thickness based on several parameters that are cycle time,confidence of fill,quality prediction,injection pressure and maximum clamp force during filling.There were seven different thickness had been applied on the Name Card Holder which was 1.0 mm,1.5 mm,2.0 mm,2.5 mm,3.0 mm,3.5 mm and 4.0 mm. Lastly,to obtain the final result of standard minimum thickness of a Name Card Holder for both material Polypropylene and Polycarbonate,ranking method had been used.As the result,for Polypropylene,Name Card Holder with 3.5 mm had been chosen while for Polycarbonate,Name card Holder with 4.0 mm had been chosen as the standard minimum thickness of the Name Card Holder.The result obtained can be use by industry as the standard minimum thickness of a commercial available Polypropylene and Polycarbonate of a plastic name card holder.

Actions (login required)

View Item