Browse By Repository:

 
 
 
   

Influence of air speed and spray pressure on urea granule physical properties

Mohd Kassim, Mohammad Khairul Azmi (2016) Influence of air speed and spray pressure on urea granule physical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

[img] Text (24 Pages)
Influence Of Air Speed And Spray Pressure On Urea Granule Physical Properties 24 Pages.pdf - Submitted Version

Download (438kB)
[img] Text (Full Text)
Influence of air speed and spray pressure on urea granule physical properties.pdf - Submitted Version
Restricted to Registered users only

Download (1MB)

Abstract

This paper presented an investigation to the influence based on the application of air speed and spray pressure in producing granule with good criteria. This research is aimed to obtain the optimal value of air speed and spray pressure. The range of parameter that used in this experiments are from 15 Hz until 45 Hz for air speed while for spray pressure are form 0.2 MPa until 0.5 MPa. Percentage of the concentration that are used in this experiments are 50%. That’s mean the concentration use 100 g of urea and 100 ml of distilled water. Besides that, the temperature that used in this experiments are remained constant which are 60 degree Celsius for drying or dehumidifying process and 42 degree Celsius for agglomeration process. This experiment are run using Fluidized Bed Granulation machine and apply the parameter by using Design Expert software. All the produced granule will be analyze with an acceptable size which are from 2.0 mm until 5.0 mm. After that, granule that have been produced will be run hardness and density test according to the standard that have been assigned. Design Expert software will be run the analysis according to the data that have been recorded. Result from Design Expert software need to run another experiments for validation of the parameter. Finally, this experiments will give an enough information for the optimum parameter to produced the good quality of granule. Finally, the optimum parameters for air speed are 28.30 Hz while 0.50 MPa for spray pressure.

Item Type: Final Year Project (Project Report)
Uncontrolled Keywords: Urea as fertilizer, Urea industry
Subjects: T Technology > T Technology (General)
T Technology > TP Chemical technology
Divisions: Library > Final Year Project > FKP
Depositing User: Nor Aini Md. Jali
Date Deposited: 08 Nov 2017 03:24
Last Modified: 04 Dec 2023 08:10
URI: http://digitalcollection.utem.edu.my/id/eprint/19793

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year