Design And Develop High Speed Steel Flying Cutter

Yusop, Azlan (2016) Design And Develop High Speed Steel Flying Cutter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text Design And Develop High Speed Steel Flying Cutter 24 Pages.pdf - Submitted Version Download (472kB)

Abstract

This paper show the fabrication process of the flying cutter cutting tool for use at the milling machine. This cutting tool suitable for cutting soft material such as Delrine, Aluminium and Copper. To fabricate this cutting tool, mild steel was selected as the raw material for fabricate tool holder. The cutting medium is made from High Speed Steel singel point lathe cutting tool. Consept of the design is follow the carbide insert face mill, the different is carbide insert face mill have many cutting point but for flying cutter it only have singel point cutting. Before fabricate cutting tool, some research about cutting angle have been study to make this project successful. Flying cutter can be classified as the chipest cutting tool and it often custome made from the machineing operator. From this cutting tool, it can reduce maintenance cost because it can be sharpen only by using table grinding machine. Compare than carbide insert face mill, if the cutting point getting burn or crack, it need to replace with a new one. After the fabrication is done, it has been running at the CNC milling machine and doing facing operation at the sample material which is Delrine, Aluminium and Copper.

Actions (login required)

View Item