Veljierson, Moses (2016) Addition Of Molybdenum Dithiophosphate (MoDTP) Into Zinc Diamyldithiocarbamate (ZDDC) Induced Corn Oil As Bio-Based Lubricant Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)
![]() |
Text (24 Pages)
Addition Of Molybdenum Dithiophosphate (MoDTP) Into Zinc Diamyldithiocarbamate (ZDDC) Induced Corn Oil As Bio-Based Lubricant Substitution.pdf - Submitted Version Download (250kB) |
Abstract
This study reports the development of a new bio-lubricant by using corn oil induced with Zinc Diamyldithiocarbamate (ZDDC) added with Molybdenum Dithiophosphate (MoDTP). The needs of having an alternative lubricant is essential as the existing mineral based lubricant is non-environmental friendly and imposed a threat to the environment. Six samples were prepared with constant concentration of Zinc Diamyldithiocarbamate (ZDDC) at 2 wt% and varied concentration of Molybdenum Dithiophosphate (MoDTP) at 0.05 wt%, 0.10 wt%, 0.15 wt% and 0.20 wt%. The prepared samples were tested using a Kinematic Viscometer to investigate the kinematic viscosity and Rotating Disc Electrode-Atomic Emission Spectroscopy (RDE-AES) to check for dilution of additive in the samples. Characterization process of investigating the coefficient of friction and wear scar diameter uses a four ball tester. Samples with 2 wt% Zinc Diamyldithiocarbamate (ZDDC) and 0.05 wt% of Molybdenum Dithiophosphate (MoDTP) displayed the most desirable concentration of additive added when it exhibited a coefficient of friction of 0.079 and a very small wear scar diameter at 104 μm. This newly developed bio-lubricant showed a reduction on coefficient of friction when only added with 0.05 wt% of Molybdenum Dithiophosphate (MoDTP) into corn oil with constant concentration of Zinc Diamyldithiocarbamate (ZDDC) at 2 wt% exhibited the desirable tribological characteristics and showed the similar trending on wear scar diameter. As a conclusion, with the evidence based on result obtained this bio-lubricant is capable to fulfill the demand to overcome the problem as a bio-based lubricant substitution which were rarely being studied by others.
Item Type: | Final Year Project (Project Report) |
---|---|
Uncontrolled Keywords: | Lubrication and lubricants - Additives, Lubricant and lubricants - Analysis, Lubricating oils - Additives |
Subjects: | T Technology > T Technology (General) T Technology > TJ Mechanical engineering and machinery |
Divisions: | Library > Final Year Project > FTK |
Depositing User: | Mohd Hannif Jamaludin |
Date Deposited: | 20 Sep 2017 09:08 |
Last Modified: | 20 Sep 2017 09:08 |
URI: | http://digitalcollection.utem.edu.my/id/eprint/19488 |
Actions (login required)
![]() |
View Item |