Development Of New Magnetic Clamping For Lathe Machine (Model GH-1440-3)

Mohd Saleh, Afferry (2016) Development Of New Magnetic Clamping For Lathe Machine (Model GH-1440-3). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text Development Of New Magnetic Clamping For Lathe Machine (Model GH-1440-3) 24 Pages.pdf - Submitted Version Download (327kB)

Abstract

Chuck is a device that used to clamped any material that will be machine with the turning machine and it is connected to the headstock spindle of the lathe. These devices have its own limitation where the thickness must not less the area of clamping on the chuck. This project is to development a new magnetic clamping for attach and detach the workpiece on the chuck and it able to clamp small and thin workpiece. The chuck will be made by using mild steel and will have a few intercepts with brass. Magnetic mechanism will be placed in the chuck. A few cutting processes will be done between the conventional chuck and the magnetic clamping on a different thickness of workpiece. Next all the workpiece will be tested on few parameters on specimen and preform surface roughness testing to compare and to finalize where the effectiveness of the magnetic clamping. From the result obtain, with the magnetic clamping have much better result of surface roughness on thin workpiece. Thus, using magnetic clamping as the clamping method for thin workpiece is much effective in turning machine.

Actions (login required)

View Item