Mohd Noh, Muhammad Izzuddin (2015) Tool life of high speed steel hardfaced with tool steel deposited by GMAW. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)
![]() |
Text (24 pages)
Tool Life Of High Speed Steel Hardfaced With Tool Steel Deposited By GMAW 24 Pages.pdf - Submitted Version Download (347kB) |
![]() |
Text (Full Text)
Tool Life of High Speed Steel Hardfaced With Tool Steel Deposited by Gmaw.pdf - Submitted Version Restricted to Repository staff only Download (1MB) |
Abstract
The main goal of this project is to ‘Study the Tool Life on Hardfaced High Speed Steel cutting tool’ and also the parameters optimization in producing a better tool life using cutting speed and feed rate as manipulated variables and depth of cut, material of cutting tool, type of coolant and coolant direction as constant variables. Aiming to achieve this goal, several turning experiments were carried out with different cutting speed and feed rate. When the tool reaches its wear in between 0.3 to 0.35mm, the experiment was stopped. The wear was determined by using microscope. The present study tested the hypothesis that tool wear of hardfaced cutting tool are better when compare with as received cutting tool. The proposed method uses an Optical Microscope to measure the wear of the high speed steel cutting tool employed in single-point turning operation. The results of this project was the hardfaced cutting tool did gives better tool life compared with as received cutting tool.
Item Type: | Final Year Project (Project Report) |
---|---|
Uncontrolled Keywords: | Metal-cutting tools, High-speed machining |
Subjects: | T Technology > T Technology (General) T Technology > TJ Mechanical engineering and machinery |
Divisions: | Library > Final Year Project > FKP |
Depositing User: | Ahmad Tarmizi Abdul Hadi |
Date Deposited: | 12 Aug 2016 03:09 |
Last Modified: | 30 Nov 2023 08:02 |
URI: | http://digitalcollection.utem.edu.my/id/eprint/16954 |
Actions (login required)
![]() |
View Item |