Reverse Engineering Of A Container Product Of A Plastic Injection Molding

Rosdiadi, Ramli (2005) Reverse Engineering Of A Container Product Of A Plastic Injection Molding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Reverse_Engineering_Of_A_Container_Product_Of_A_Plastic_Injection_Molding_-_Rosdiadi_b_Ramli_-_TA168.5.R67_2005_-_24_Pages.pdf - Submitted Version Download (1MB)
	PDF (Full Text) Reverse_Engineering_Of_A_Container_Product_Of_A_Plastic_Injection_Molding_-_Rosdiadi_b_Ramli_-_TA168.5.R67_2005.pdf - Submitted Version Restricted to Registered users only Download (7MB)

Abstract

The reverse engineering terms is very familiar to re-design the product existed. Most of the product existing nowadays starts from the research in reverse engineering study. There are a lot of advantages in this field such as the cost and time can be reduce in product manufacture and also we can integrate the product into a high level usage after a few research been made. In this project, the scope mostly been specified to find the manufacturing process of the mold parts and to analyze it. The product produced by injection molding process used a mold as a guide to get the shape. The mold existed being designed back its core and cavity to make the container. The design begin with construct the product features first and then followed the core and its cavity. The next step was analyzing the injection time exactly need for the product to flll the mold, selecting others material that can be use and analyze the measurements taken. Before the manufacturing process, measurement of the parts will be taking to compare with the actual measurements. By using the measurement taken, we can machine the parts easier and more accurate. The process flow started with identifying the part following with measuring the dimensions at the product and the end was machining using a simulation provided by CATIA software.

Actions (login required)

View Item