Items where Division is "Library > Final Year Project > FKP" and Year is 2022

A

Abang Ahmad, Abg Muhd Fakhrullah (2022) Effects of kenaf fibre surface treatment to the mechanical properties of recycled polypropylene composites. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abd Manaf, Amirul Hamim (2022) Evaluation of the electrical energy efficiency of the new faculty of manufacturing engineering, UTeM building through light intensity analysis. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abd Rahim, Mohammad Na’aim (2022) Optimum parameters of graphene reinforced magnesium alloy and its influence on the mechanical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Wahab, Nur Umairah Hafifah (2022) Effect of glazed roof tile waste weight fraction on the mechanical properties of eco-friendly concrete. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Talib, Azreen Shafira (2022) Design and evaluation of test rig for measuring hip flexor strength in standing position. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Adli, Abdullah Izuddin (2022) Simulation of the drilling analysis on machining characteristics towards carbon steel using the respond surface methodology (RSM). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Adnan, Nur Afiqah (2022) Influence of nano-reinforced particles on the mechanical properties of aluminium metal matrix composite fabricated by cooling slope casting. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Faudzi, Muhammad Faiz (2022) Experimental investigation of tool wear progression in turning of NIMONIC C-263 alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Rozelan, Aina Dalila (2022) Process development of die casting in a production line. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ajang, Dalgush Dipak (2022) Hygrothermal ageing of recycled polypropylene and rubberwood waste composite for construction material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Amirah Maisarah (2022) Mechanical properties and surface quality of natural rubber-poly (Lactic Acid) composites for fused deposition modelling technology. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ameruddin, Haizatul Norisha (2022) Preparation and characterization of natural rubber latex filled with stannic oxide nanocomposites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anen, Marvrick (2022) Workability and compressive strength of concrete reinforced by plastic waste concrete aggregates. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Siti Hajar (2022) Study on wear performance of heat treated thixoformed aluminium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azlan, Diana Annasuhah (2022) Effect of partial remelting on microstructure and mechanical properties of thixoformed aluminium alloys. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Afrena Darwisyah (2022) Detection of defect of an automotive part using image processing approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

B

Baharud-Din, Nursyuhada (2022) Productivity improvements through Poka Yoke concept in food industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharudin, Norshamira Aizat (2022) Productivity improvement in SME industry by using time study and work measurement analysis. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Balakrishnan, Ruvendran (2022) Influence of drill geometry on hole quality in drilling hybrid carbon fibre reinforced polymer (HCFRP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baskerran, Mineshvaran (2022) Relayout the production floor of teaching factor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Chan, Wai Kit (2022) Performance of AISI 1045 steel of simulation turning process base on previous experimental result. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Cheak, Celina Mei Min (2022) The effect of hand dryer fan parameter on noise and aerodynamic level. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choir, Yek Guan (2022) Characterization of biaxially oriented polypropylene (BOPP) films containing baggy web defect. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

F

Foo, Cher Liang (2022) Conceptualisation of modular airless tyre using TRIZ and Pugh method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

G

Goh, She Hui (2022) Warehouse inventory system using message queuing telemetry transport. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Shi Ming (2022) Synthesis and characterization of. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

H

Hairudin, Abdullah Azam (2022) Design and development of a testing rig for position localization using robot operating system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasnol Yusri, Hasriq Ikmal (2022) Drilling of titanium alloy by using hybrid nanofluid in minimum quantity lubricant (MQL). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kamaruzaman, Noreen Aqilla (2022) Investigation on tool life and wear progression of carbide tool in turning nimonic C-263 under multi-conditions. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Kumaran, Lingges (2022) Optimization of machining parameter in drilliing carbon fiber reinforced plastic (CFRP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kuppan, Sathiyah (2022) Wear performances investigation on aluminium-based metal matrix composite prepared through thixoforming. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lim, Hou Hua (2022) System development of image data augmentation using generative adversarial network (GAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lujah, Brendan Steeve (2022) Analysis on success factors of lean six sigma implementation in SME and it’s relevancies in era of pandemic covid-19. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

M

Mageswaran, Raveen Kumar (2022) Re-evaluating standard operating procedures for haberdashery product using elemental breakdown analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Maizatul Aisyah (2022) The effect of filler loadings to the mechanical and physical properties of tin oxide reinforced natural rubber nanocomposites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fadzil, Nurzurida (2022) Effect of processing parameter on hydrolysis method to produce titanium dioxide for thermal spray process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Harani, Muhammad Fathullah (2022) 5S and autonomous maintenance for lean practitioner at an aerospace manufacturing : A case study. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohamad Harani, Muhammad Fathullah (2022) Design improvement and vibration analysis of a fabricated pipe bevelling jig for welding preparation. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohamad Saufe, Muhammad Aufa (2022) Design of sliding mode controller for robust tracking of pneumatic systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Zainudin, Muhammad Zarifhilmi (2022) Synthesis and characterization of hydroxyapatite derived from fish bone by heat treatment. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohammad Sufian, Mohammad Ismail Anuar (2022) Physicomechanical properties of clay reinforced plastic waste concrete aggregates. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Zen, Muhammad Asyraf (2022) Regression analysis of heart rate for driving fatigue using response surface methodology (RSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khori, Nor Khoriha Emielia (2022) Analysis of thermal changes on nanocomposites thermoelectric generator device in different fluid dynamic conditions. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Nazilah, Nurul Shaffiqa (2022) Preparation and characterization of r-PP/PLA biodegradable thermoplastic blend. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shaed, Nur Amira Faqihah (2022) Development of 3D defect detection system of automotive parts using image processing approach. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Shah, Muhammad Azraie (2022) Mathematical analysis of heart rate for driving fatigue using Box-Behnken design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sufi, Muhammad Syakir (2022) Development of assistive device for hip abductor adductor for neurological and spinal cord injury people. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Zainuddin, Arni Nabila (2022) Durability of rubber wood flour-polymer composite exposed to accelerated freeze thaw cycling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Ng, Eunice Xin Hui (2022) MARI-a practical solution for minimizing muscle fatigue associated with prolonged standing at industrial workplace. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

O

Oii, Shen Zhuang (2022) Design and implementation of home assistant based on Raspberry Pi for home energy management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

P

Patrick, Philip (2022) Effects of stirring parameters on the rheocast microstructure and mechanical properties of magnesium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Rajendran, Thavinnesh Kumar (2022) Quality and performance investigation of 3D printed ABS and PETG parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Nur Iffah Syamimi (2022) Quality improvement in rice production industry using DMAIC approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Syasya Syahindah (2022) Lean implementation of value stream mapping for the reduction of production time and quality defect in electronic industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rusli, Nurin Syafiya (2022) Study of polypropylene/natural rubber thermoplastic elastomer loaded with palm ash. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Saad, Ainur Fazliani (2022) Preparation and characterization of nanocellulose from orange peel waste. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Salimi, Muhammad Syazwan (2022) Development of machine vision system by using tensorflow for object detection in manufacturing. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Sindam, Dorestey (2022) FTIR and porosity analysis of the humidity-exposed PLA-TPU filaments in additive manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Srikanthan, Thanaaji (2022) Design of gain scheduling PID controller for precise positioning of pneumatic system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

Thiagarajan, Eswaran (2022) Synthesis and characterization of electrodeposited Bi2Te3-graphene nanocomposite film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tuan Hussin, Tuan Norliza Hanim (2022) Investigation on the surface roughness of the Nimonic C-263 alloy during turning under different machining conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tuan Hussin, Tuan Norliza Hanim (2022) Investigation on the surface roughness of the Nimonic C-263 alloy during turning under different machining conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

U

Udin, Mary (2022) Recycle food waste into animal food (dog). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

Wan Mahasan, Wan Nor Syafiqah (2022) Analysis of simultaneous wrist torque and electromyography of the dominant hand:The effects of wrist position, exertion direction and gender. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

William, Dalglish (2022) Preparation and characterization of natural rubber compound using treated and untreated waste cooking oil as green processing oils. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Young, Seng Hong (2022) Power generated analysis of thermoelectric generator device based on electrodeposited nanocomposites through fluid flow simulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zainal, Muhammad Aiman (2022) The implementation of UAV mapping strategy for oil detection with GIS application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainudin, Muhammad Deenni Huzair (2022) Optimization of cooling system using simulation software in injection moulding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zuhaimi, Afifah Khairina (2022) Investigation on physico-mechanical properties of glass-ceramic composite from eco-waste materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Farez Amsyar (2022) Experimental study of milling process using solid lubricant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)