Items where Division is "Library > Final Year Project > FKP" and Year is 2017

A

Abd Aziz, Syazxerlin (2017) Line balancing using lean manufacturing tools at balloon packaging department. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Latif, Muhammad Fadzilan (2017) The development of portable in-situ open circuit potential test cell. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Mudtalib, Nur Elina Shahrina Amza (2017) Synthesis of graphene nanoplatelets using chemical vapour deposition and waste cooking oil as carbon feedstock. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Abdul Wafi (2017) Effects of solvent on TiO2 sol-gel thin films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Jalil, Muhammad Hafizzul Saffuwan (2017) Design and development of a checking fixture for an automotive press part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Manap, Muhamad Naim Fahmi (2017) Investigation of tool wear and surface roughness when machining AISI 1045 with CIP pressed ceramic cutting tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Muhammad Rafiq (2017) Design and development of vision guided height adjustable conveyor platform on automated guided vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nurul Amirah (2017) Surface finish improvement using retraction method for fused deposition modeling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahid, Nadia Mazwa (2017) Effect of repair welding on pipes with dissimilar materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah Kamil, Puteri Eliani Fikri (2017) Layout analysis and improvement in a manufacturing industry : a case study. Technical Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohd Fairuznizam (2017) Flat plastic part optimization in injection moulding of pure polypropylene and polypropylene with talc using Taguchi method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Nurulnabilah (2017) Preparation and characterization of hematite iron oxide/CNT for photocatalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Akmar, Ahmad Zahin (2017) Design of automatic workplace clamp for bridgeport vertical milling machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Bakhtiar, Nur 'Izzati (2017) Design and development of seated foot press assistive device for return to work rehabilitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Fadzi, Ahmad Ridhwan (2017) Corrosion behaviour of mild steel coated with epoxy-graphene film in 3.5 wt.% NaCI solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Mawardi, Adilla Fasha (2017) Effect of applied load and the sliding speed on the subsurface deformation of wear on hybrid metal matrix composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Tajudin, Ahmad Farhan (2017) Fluidized bed granulation process : effect of chamber and binder temperature on granule physical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Al-Bakri, Abdulrahman Mohsen Saleh (2017) Design of control and integration strategy for multiple handling system using programmable logic controller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alwiy, Muhamad Fauzie (2017) Design of personalised insole for production line industrial workers via level of pain and pressure distribution data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Argenan, Kugan (2017) Development of a simple robot with human-robot interaction (HRI) features. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ariston Shah, Azmeer Shah (2017) Performance analysis of industrial robot under loaded conditions and various distances. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aslah, Mohd Zaim Afiq (2017) A study of future of manufacturing in the context of developing countries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Ayob, Muhammed Syameel (2017) Parameter-properties relationship of thin plate welding by ColdArc technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mohammad Nur Shafiq (2017) Development of light Pneumatic Artificial Muscle (PAM) for positioning task. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhammad Najmi (2017) Bees algorithm hybrid with Hooke method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Nor Azatul Fasya (2017) Elimination of product shortage at dispatch line in manufacturing industry by using lean tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Norsyafiq Amirulamry (2017) Effect of citrate bath composition and heat treatment process on the properties of electrodeposited Nickel-Fly Ash (Ni- FA) composite coating on aluminium alloy 7075 substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

B

Baskaran, Ashvinaa (2017) Design and development of RFID metal-based items tracking system for automotive manufacturing plant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Chai, Fong Ling (2017) Validation of Kinect-RULA system for workstations assessment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Chee Hoong (2017) FEM analysis on face milling of Inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Kai Sin (2017) Development of an automated coolant system for CNC machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chelliah, Ratnadevi (2017) Incorporating space division at initialization phase of bees algorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Chee Seng (2017) Development of decision making process for fused deposition modeling machines selection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiam, Chun Hong (2017) Integration of an automated guided vehicle system with a programmable logic controlled material handling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiew, Shet Yee (2017) Work posture improvement at plastic printing process in plastic manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Kean Mun (2017) Formation of cobalt doped zinc oxide photocatalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiong, Li Shen (2017) A triz approach to reduce cycle time in semiconductor test process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chung, Kar Yee (2017) Study of an aesthetic/emotional preferences on the product design characteristics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

H

Halim, Asmira (2017) Sustainable design manufacturing to the needs of Industry 4.0. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Mohammad Noor Zaidi (2017) The study of luminance effect on surface roughness of metallic surface by using vision system technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Norhafizah (2017) Time waste reduction by simulation in service industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamid, Fatin Aini (2017) An investigation of milling process with inclusion of nanoparticles as a coolant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasan, Fatin Hanani (2017) Application of integrated Analytic Hierarchy Process (AHP) and Technique of Order Preference by Similarity to Ideal Solution (TOPSIS) in conceptual design selection of hospital beds. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Roslan (2017) Optimization of compression molding process for NR/EPDM elastomeric material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

I

Ibrahim, Siti Nur Ailisa (2017) Determination of clearance for the design of bending die for looping a cable stayed support plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Nor Shwazni (2017) The effect of cooling slope casting on microstructure and mechanical properties of A319 alloy after processed by equal channel angular pressing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Nur Hafizah (2017) Microstructure evolution and mechanical properties of rheocast A1-5Si-3Cu alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

J

Jahari, Nor Hidayah (2017) Tool wear and wear progression of uncoated carbide in turning titanium alloy Ti-6AI-4V ELI under vegetable oil based carbon nanofiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaiban, Floriena Erika (2017) Future of manufacturing : a study on the front-end requirements of Industrie 4.0 in Malaysia perspective. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamaludin, Muhammad Izzul (2017) Development of ultrasonic assisted compression moulding mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kamarulbahrin, Izlin Anne Kamelia (2017) Optical and photoelectrochemical studies of tungsten diselenide (WSe₂) thin films for solar panels. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamrul Zaman, Nur Najwa Aqilah (2017) Formulation of green printing ink for ceramic subtrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Katimin, Nornaziera (2017) Synthesis of aluminium doped zinc oxide thin film prepared using chemical bath deposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kooh, Chu Aik (2017) Controller design of a two-wheeled self balancing mobile robot base on a simulation view point. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lai, Yan Ling (2017) Ergonomics intervention to improve plastic roll handling process at production area in plastic manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lasa, Norhazirah (2017) Establishing the design guideline of customized insole via pressure distribution foot planar equipment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Poh Yan (2017) Identification of lateral transfer distance that minimizes twisting and bending motions in workstation design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leong, Chee Weng (2017) Reduction of balloon defects in stripping process using DMAIC approach : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Mei Mei (2017) Redesign work system for productivity improvement : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Zhi Li (2017) A development of modular automated storage and retrieval system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Fang Pang (2017) The development of transmitter and receiver for remote control helicopter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Kim Yew (2017) Analysis and control of vibration in machine tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Ruoh Lin (2017) Effect of thermal cycles on tensile properties of NR/EPDM nanocomposites for engine mounting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ling, Hung Kit (2017) Optical and photoelectrochemical studies of tungsten disulfide (WS₂) thin films for solar panel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh, Mun Kong (2017) Fluidized bed granulation process : study on airflow effect on urea granule physical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh, Ting Pohg (2017) Profiling design preferences using Bezier curve towards Kansei engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

Mahadi, Nur Athirah (2017) Tensile properties and swell behaviours of natural rubber modified by starch for biodegradable rubber product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahmod, Amirul Rasyid (2017) Hardness and microstructure of cockle shell powder filled recycled polyethyelene-terephthalate/polycarbonate blends. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahmud, Norazilah (2017) Study of vortex tube cooling system on tool wear and surface roughness using conventional machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahrob, Noramilza (2017) Welding initiation at the entry stage of Bobbin Friction Stir Welding (BFSW). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mamat, Umie Rosmida (2017) Quality improvement using factorial design (a case study in manufacturing company). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manivanan, Logeswaran (2017) Optimizing CNC turning process parameter to reduce surface roughness of aluminium alloy 6061 in wet and dry conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Adam, Nur Syuhada (2017) Setup time reduction of snap fastener machine by implementing single minute exchange of die. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Azmi, Noramira (2017) Effect of fly ash particle size and composition on the properties of electrodeposited nickel fly ash (Ni-FA) composite coating on aluminium alloy 7075 substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Salleh, Muhammad Iqbal (2017) Biodegradability of commercial plastic bags. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Ayub Khan, Muhamad Haziq (2017) Response Surface Model (RSM) of CO₂ laser cutting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd, Siti Zaharah (2017) Effect of wire EDM process parameters on machining charateristics of aluminium alloy 6061 using Taguchi method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ali, Muhammad Zakiy Izzuddin (2017) Design and control of radio-frequency identification based conveyor platform on automated guided vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Amir, Nadia Syahida (2017) Effect of parameters on properties of sheet metal welded by rocker arm spot welding machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Halit, Muhammad Fakhrurazi (2017) Optimization of vision-guided mobile robot navigation using dual camera. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Isa, Fatin Aqillah (2017) Design analysis of a circular aluminum crashbox for a frontal accident protection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizam, Mohd Syazwan (2017) Effect of direct metal deposition of stainless steel 308 LSi wire on stainless steel 304 base plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nor, Afifah Raihana (2017) Preparation and characterization of PU/GNPs nanocomposites foam. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shahrim, Mohammad Shah All-Hafiz (2017) Design and development of the round bar motorize jig for the rotary abrasive water jet (RAWJ) process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokhtar, Muhammad Faiz (2017) Investigation of tool wear and surface roughness when machining AISI 1045 using alumina ceramic cutting tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokhtar, Nurhasyinaz (2017) Effect of equal channel angular pressing on microstructure and mechanical properties on non dendritic LM25 aluminium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Syams Baskaran, Muhammad Sany (2017) Microcontroller based single axis solar radiant tracking system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Nassharuddin, Mohamad Shafik (2017) Development of an embedded cascading PID controller of DC motor using MATLAB/Simulink. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, May Ling (2017) Reduction of yield loss for taping process in semiconductor industry using TRIZ. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Azman, Farah Norhasnani (2017) Investigation of vegetable oil based nanofluid in turning D2 steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Eezsafauzia Azalin (2017) Redesign of UTeM cafeteria workstation for work posture improvement utilising ergonimics simulation software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

O

Othaman, Anis Nabihan (2017) Formulation of polymeric binder system in urea fertilizer containing biodegradable PVA and starch. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othman, Nur Ainina Izzati (2017) Optimization Of Rotary Ultrasonic Assisted Milling For Graphite Material. Technical Report. UTeM, Melaka. (Submitted)

P

Phang, Advin Kok Seng (2017) Optimization of bio active porous poly (lactic acid) scaffold for biomedical materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Raharja, Alvin Hadiyan (2017) Development of standard time in repacking operation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Raja Dziauddin, Raja Mohd Fazrin (2017) Design of automatic fixture for scantool drilling machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Raja Izam, Raja Izzi Azrul (2017) Design of nonlinear PID with integration of tracking differentiator (TD) module for tracking performance of machine tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Abdul Muiz (2017) Design of linear conveyor for parts feeding to senes articulated robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Romeli, Muhamad Hakimi (2017) Design and development portable water saving for ablution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Noor Nabila Natasya (2017) Study the influnce of acetone to improve surface finish of 3D printed part for ABS and PLA material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosnan, Nur Syahirah (2017) Preparation and characterization of cellulose nanocrystals (CNC) from kenaf fiber via acid hydrolysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Saari, Mohamad Fikri Salehudin (2017) Comparison Between Tensile Properties And Fatigue Behaviour Of NR-EPDM Blend And Its Nanocomposites For Potential Application In Engine Mounting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salim, Nur Anis Suraya (2017) Development of energy regenerative system from air conditioner waste. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Muhammad Syazwan Nizam (2017) Effect of silane based functionalization on thermal and electrical properties of nanographene/nylon 6,6 composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Shahrizal (2017) Effect of suspension's ionic conductivity on electrophoretic deposition of h-BN. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Santa, Mohamad Noriman (2017) Human-robot interaction (HRI) for rehabilitation patients with an animal robot using image processing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shafi'e, Muhammad Yusri (2017) Tool performance of uncoated tungsten carbide insert during turning Ti-6AI-4V under dry and nanofluid condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shahrum Amlee, Syuhadatul Nadia (2017) Preparation and characterization of polyurethane filled bentonite composites foams. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shawal, Nur Shuhada (2017) Preparation and characterization of polyol using waste cooking oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sohimeh, Shahirul Ashraf (2017) Development of remote controlled mobile robot through Wi-Fi or IoT platform. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Nur Adila Shaffini (2017) Selection of conveyor system using Fuzzy analytical hierarchy process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

Taharim, Nor Najwa (2017) Quality improvement in manufacturing industry by using DMAIC approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Xihan (2017) A study of future of manufacturing in the context of developed countries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Xin Yi (2017) Effect of plastomer on mechanical properties and characteristics of frozen cast polypropylene film for food packaging. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tang, Mei Shick (2017) The influence of process parameters on mechanical properties of fused deposition modeling parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tengku Abdul Jalil, Tengku Ahmad Shauki (2017) Design and fabrication of personal electric vehicle driven by brushless hub motor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teoh, Yen Ting (2017) A development of smart automated home security system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ting, Hui Yin (2017) Investigation of the effect of raster angle and layer thickness on mechanical properties of fused deposition modeling (FDM) parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tiong, Nathanael Yong Sing (2017) Design of intelligent traffic light system for efficient traffic flow. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tneh, Tze Yeow (2017) Implementation of IoT on water quality improvement through a sustainable design at Tasik UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Toh, Hui San (2017) Sustainability key performance indicators (KPIs) for healthcare industry using analytic network process (ANP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Too, Yi Wei (2017) The physiognomy of customer archetype towards the product design preference. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tormudzi, Umi Nurnajeha (2017) A study on profile design using Kano-AHP approach for baju muslimah product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tunku Adaham, Tunku Aidil Ilham (2017) Electrochemical performance of graphene/molybdenum disulfide electrodes based supercapacitor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

Wee, Bulan Ammy Lee Yen (2017) Preparation of cobalt decorated titanium dioxide nanotubes by electrodeposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, How Jie (2017) Mechanical design and development of a 4 wheels skid steering mobile platform system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Yahaya, Muhamad Amerul Mukmin (2017) Electrodepostion of nickel fly ash (Ni-FA) composite coating on aluminium alloy 7075 substrate from non-aqueous media : study effect of current density. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yahaya, Muhammad Reza (2017) Experimental investigation of drilling process using nanofluid as a coolant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yahya, Sahrul Bakyah (2017) Design and analysis of gating in plastic paper clip mold. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, Yeok Ven (2017) Reveal hidden waste through Maynard Operation Sequence Technique (MOST) : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yee, Sze Ling (2017) Investigation on mechanical properties of additive manufactured bone scaffold. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yumasir, Mohamad Hadi (2017) Design analysis of metal forming process for the corrugated metal gasket. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zainal Abidin, Mohd Izzat (2017) Design and analysis of plastic injection mould using multiple cavity mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainuddin, Muhammad Fikri (2017) Anthropometry of UTeM FKP male students : comparison using motion capture camera and traditional anthropometric method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad Yusuf (2017) Experimental investigation of tungsten carbide using wire EDM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zamuri, Amiza Aliyana (2017) Reducing rejection on nickel free plating at finishing line in metal manufacturing company by using Kaizen approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nurul Atiqah (2017) Printing large 3D objects with interlocking part design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)