Items where Division is "Library > Final Year Project > FKE" and Year is 2014

'

'Iffah Masturah , Ibrahim (2014) Classify EMG data for upper limb muscle based on different movement of arm rehabilitation device. Project Report. UTeM. (Submitted)

A

Abdul Fatah Hilmy , Harun (2014) Analysis of optimum coil parameter of permanent magnet generator for energy harvesting application. Project Report. UTeM. (Submitted)

Abdullah Ameer, Izer (2014) Designing and analysis the performance of medium voltage cable using finite element method (FEM). Project Report. UTeM. (Submitted)

Ahmad Badrun Hisham , Abdul Rahim (2014) Fuzzy logic inverted pendulum. Project Report. UTeM. (Submitted)

Ahmad Faiz , Ahmad Azahar (2014) Wireless power transfer monitoring. Project Report. UTeM. (Submitted)

Ahmad Hariz , Tarif (2014) Study of electrical and chemical properties of transformer insulating oils. Project Report. UTeM. (Submitted)

Ahmad Tarmizi, Azily (2014) Experimental study on the ground resistance reduction based on earth electrode. Project Report. UTeM. (Submitted)

Ahmad Uzair , Ahmad Suhaimi (2014) Frequency response analysis on solar cell. Project Report. UTeM. (Submitted)

Ain Afifah , Ahiaruddin (2014) Analysis of three phase inverter for BLDC motor. Project Report. UTeM. (Submitted)

Akmal Fuad , Yusuf (2014) Impact of fluctuating input of PV to harmonic distortion. Project Report. UTeM. (Submitted)

Amelia , Md Rasid (2014) Electric vehicle (EV) power optimization strategies. Project Report. UTeM. (Submitted)

Anies Syahirah , Zainol (2014) Study on different types of surge arrester for 132kV overhead transmission line in shielding failure analysis. Project Report. UTeM. (Submitted)

Art Harris , Lambiase (2014) Solving knight's tour problem using paddy field algorithm. Project Report. UTeM. (Submitted)

Azrul , Mohamad Sazali (2014) Multy-sensory control system for remotely control surface vessel. Project Report. UTeM. (Submitted)

C

Carolyn , Lim Kim Yen (2014) Performance analysis of power quality monitoring system. Project Report. UTeM. (Submitted)

Chaw, Pui Ling (2014) High accuracy lithium-ion electric vehicle battery monitoring system. Project Report. UTeM. (Submitted)

Che Wan Muhammad Ridhuan , Che Wan Razaley (2014) Small wind energy converter. Project Report. UTeM. (Submitted)

Chew , Xiao Lin (2014) Modeling sit to stand motion of humanoid robot using telescopic inverted pendulum for predicting stable motion. Project Report. UTeM. (Submitted)

Chia , Wen Yung (2014) Crawler type robot. Project Report. UTeM. (Submitted)

Chin , Fen Ying (2014) Analysis on passive vehicle suspension system. Project Report. UTeM. (Submitted)

Chooi , Kah Yung (2014) Design and development of motor control using EMG-force signal. Project Report. UTeM. (Submitted)

F

Farah Atika , Ahmad Azam (2014) The development of peak current mode control of buck converter. Project Report. UTeM. (Submitted)

Fiona Serina , Daud (2014) Modelling and pso-based LQR controller design for coupled tank system. Project Report. UTeM. (Submitted)

G

Goh , Wei Jun (2014) Design of robot head for expression of human emotion. Project Report. UTeM. (Submitted)

H

Haidir , Morshidi (2014) The creation of duval triangle by software implementation for dissolved gas analysis. Project Report. UTeM. (Submitted)

Hakiimuddin , Shaari (2014) Development of microgrid based PV-restoration incorporating demand responce. Project Report. UTeM. (Submitted)

Harman , Usman (2014) Sweep frequency response analysis using time frequency distribution. Project Report. UTeM. (Submitted)

Hazwal , Ngadeni (2014) Development and analysis of three phase seven level trinary DC source multilevel inverter. Project Report. UTeM. (Submitted)

Ho , Shun Ten (2014) Comparative evaluation of modulation algorithms for three-phase neutral-point-clamped (NPC) multilevel inverter. Project Report. UTeM. (Submitted)

J

Jim , Kai Yiat (2014) Design, construction and analysis of biped robot for walking motion. Project Report. UTeM. (Submitted)

Jo Jo , Sam Wai Lun (2014) Navigation study using RFID network for visually impaired person. Project Report. UTeM. (Submitted)

Joycelyn , Goh May Yuen (2014) Simulation of SHE-PWM for multilevel inverter. Project Report. UTeM. (Submitted)

Julianous , Ketihus (2014) Study and development of the drag reduction system for go-kart. Project Report. UTeM. (Submitted)

K

Khairul Hafiz , Shafad (2014) Underwater vehicle buoyancy control (surface). Project Report. UTeM. (Submitted)

Khoo , Hui Ping (2014) Feature extraction of muscle fatigue using surface electromyography (SEMG) technique. Project Report. UTeM. (Submitted)

L

Lau , Cheiw Yun (2014) PV grid parity analysis for residential sector in Malaysia. Project Report. UTeM. (Submitted)

Lee , Dai Cong (2014) Design an intelligent controller for depth control of ROV using micro-box 2000/2000C. Project Report. UTeM. (Submitted)

Lee , Jun Wei (2014) Leap motion : controlled robotic arm. Project Report. UTeM. (Submitted)

Lew , Huey Sin (2014) System performance evaluation of UTeM solar PV system. Project Report. UTeM. (Submitted)

Liaw , Geok Pheng (2014) Design of vision system to recognize the scribed number on the wafer. Project Report. UTeM. (Submitted)

Lim , Chen Chuan (2014) Impact of EV charging on LV networks. Project Report. UTeM. (Submitted)

Lim , Geok Yin (2014) Analysis of five phase transformer. Project Report. UTeM. (Submitted)

Lim , Seong Chuan (2014) Development and vibration analysis of go-kart system. Project Report. UTeM. (Submitted)

Low , Wai Tuck (2014) Design and development of turning motion trajectory for limb assisting device. Project Report. UTeM. (Submitted)

M

Mashitah , Mohd Farith (2014) Development of automatic load-shedding strategy for stand-alone photovoltaic system. Project Report. UTeM. (Submitted)

Mohamad Fakri , Juhari (2014) Design and development of exoskeleton bionic hand. Project Report. UTeM. (Submitted)

Mohamad Fauzi , Darmo (2014) Design and development of wireless robotic hand. Project Report. UTeM. (Submitted)

Mohamad Firdaus , Arifin (2014) Development of solar powered smart traffic light system. Project Report. UTeM. (Submitted)

Mohamad Hafiz , Abdul Wahid (2014) Transformer dissolved gas analysis using duval triangle method via android. Project Report. UTeM. (Submitted)

Mohamad Rasyidi , Nazir Ali (2014) Simulation of direct torque control of induction machine using three-level cascaded H-bridge multilevel inverter. Project Report. UTeM. (Submitted)

Mohamad Safuwan , Romli (2014) Technical viability of parabolic dish concentrating solar power in Malaysia environment. Project Report. UTeM. (Submitted)

Mohamad Shahrul Nidzam , Halim (2014) Performance analysis of 100 W boost converter. Project Report. UTeM. (Submitted)

Mohamad Suffian , Ahmad (2014) High frequency radiation chaotic leader versus return stroke from convection and frontal thunderstorm. Project Report. UTeM. (Submitted)

Mohamad Yazid , Abdul Razak (2014) Development of low voltage distribution automation system based on remote terminal unit, ABB RTU211. Project Report. UTeM. (Submitted)

Mohammad Hariz , Zarir (2014) Development of human machine interface (HMI) and interfacing for low voltage distribution automation system (DAS). Project Report. UTeM. (Submitted)

Mohammad Syahir , Mansor (2014) Transformer faults classification from polarization current measurement results using statistical technique. Project Report. UTeM. (Submitted)

Mohd Fadhlan , Mohamad (2014) A comparative study of optimization algorithms for 33kV distribution network reconfiguration. Project Report. UTeM. (Submitted)

Mohd Lokman , Ramli (2014) Simulation of dish stirling system for Malaysia environment. Project Report. UTeM. (Submitted)

Mohd Qusyairi , Badrul Hisham (2014) Design of robotic structure for people with disabilities for eating and drinking motion (eating). Project Report. UTeM. (Submitted)

Mohd Safwan , Mohamad (2014) Sweep frequency response analysis (SFRA) results interpretation using cross correlation coefficient method for distribution transformer. Project Report. UTeM. (Submitted)

Muhamad Hafidzi , Ismail (2014) Homestay power switching card system (HOPs-C). Project Report. UTeM. (Submitted)

Muhamad Hafiy Syazwan , Zainoddin (2014) SEMG features extraction for back muscle impairment. Project Report. UTeM. (Submitted)

Muhamad Syazwan , Mohd Jasni (2014) Features extraction of surface electromyopgraphy in term of force. Project Report. UTeM. (Submitted)

Muhamad Yusazlan , Yusof (2014) Two-link musculoskeletal structure workspace force control. Project Report. UTeM. (Submitted)

Muhammad Adib , Md Rohim (2014) Speed and torque controls of brushless direct current motor. Project Report. UTeM. (Submitted)

Muhammad Amirul , Sulaiman (2014) Development of sensorless solar tracker system. Project Report. UTeM. (Submitted)

Muhammad Anas , Borhan (2014) Development of EMG amplification circuit. Project Report. UTeM. (Submitted)

Muhammad Azfizan , Rahim (2014) PMSM sensorless control using back-EMF based position and speed estimation. Project Report. UTeM. (Submitted)

Muhammad Azlan Arif , Sa'adon (2014) Human machine interface (HMI) development of a distribution automation system. Project Report. UTeM. (Submitted)

Muhammad Azwadi , Abdullah (2014) Dielectric performance of different types of polymeric material under standard test procedures. Project Report. UTeM. (Submitted)

Muhammad Faid , Mustaffa (2014) Design the low pass passive filter for grid connected single-phase voltage source inverter system. Project Report. UTeM. (Submitted)

Muhammad Nasiruddin , Aziz (2014) Bus stand lamp using piezoelectric energy. Project Report. UTeM. (Submitted)

Muhammad Sayuthi , Ismail (2014) To construct and analysis of five-phase induction motor. Project Report. UTeM. (Submitted)

Muhammad Syahmi , Ahmad Johari (2014) Solar harvest and supercapacitor for power storage in low power device. Project Report. UTeM. (Submitted)

Muhammad Tarmizi , Rosli (2014) Design a remote terminal unit (RTU) fault detection sensor to detect voltage in range of under voltage and overvoltage fault. Project Report. UTeM. (Submitted)

Muhammad Zulfadhli , Kamaruzaman (2014) Design and development of trajectory for lower limb assistive device using contralateral limb motion. Project Report. UTeM. (Submitted)

Muhd Khairi , Abdul Arif (2014) Development of smart meter system for low voltage residential premises in Malaysia. Project Report. UTeM. (Submitted)

Murnie Shakilla , Shidan (2014) Distribution network reconfiguration by using evolutionary programming (EP) for minimizing power losses. Project Report. UTeM. (Submitted)

N

Nabilah , Mat Kassim (2014) Green energy management system (GreEMys). Project Report. UTeM. (Submitted)

Ng , Mei Chin (2014) Modeling of a small scale UAV quadrotor system. Project Report. UTeM. (Submitted)

Ng , See Man (2014) Modeling and analysis performance simulation performance of multilevel inverter using bipolar and unipolar switching schemes. Project Report. UTeM. (Submitted)

Ng , Wan Teng (2014) Development of voice recognition on navigation system for visually impaired person. Project Report. UTeM. (Submitted)

Noor Fatiha , Omar (2014) Dynamic modeling of a double-pendulum gantry crane system. Project Report. UTeM. (Submitted)

Nor Mazura , Shahrin (2014) Optimum network reconfiguration and DGs sizing with allocation simultananeously by using particle swarm optimization. Project Report. UTeM. (Submitted)

Norazelina , Kamisman (2014) Space vector modulation for five-phase induction speed drive control. Project Report. UTeM. (Submitted)

Nur Amirah , Othman (2014) A formal method framework for automated verification of a deaerator system. Project Report. UTeM. (Submitted)

Nur Athykah , Basiran (2014) Simulation on harmonic resonance impact of power factor correction capacitor in distribution system. Project Report. UTeM. (Submitted)

Nur Atiqah Masita , Hasan (2014) Designing of fault's pattern for 3 phase inverter using VB. Project Report. UTeM. (Submitted)

Nur Fatihah , Mohd Marzuki (2014) A smart home security system based on ZigBee. Project Report. UTeM. (Submitted)

Nur Faziera , Napis (2014) Distribution network reconfiguration (DNR) and distribution generation (DG) sizing simultaneously based on rank evolutionary particle swarm optimization (REPSO). Project Report. UTeM. (Submitted)

Nur Saiyidah , Anas (2014) Analysis and simulation three phases of Z source inverter. Project Report. UTeM. (Submitted)

Nur Sakinah , Mohd Ismail (2014) Development of graphical user interface (GUI) of car dashboard from controller area network (CAN) bus. Project Report. UTeM. (Submitted)

Nur Shuhada , Ghazali (2014) Modeling and simulation of space vector pulse width modulation for three phase voltage source inverter. Project Report. UTeM. (Submitted)

Nurrafidah , Mohammad Rashid (2014) An approach of dependable logic controller for pick and place robotic system in computer integrated manufacturing system. Project Report. UTeM. (Submitted)

Nurul Asshikin , Kasim (2014) Analysis of faults in three phase voltage source inverter. Project Report. UTeM. (Submitted)

Nurul Farhana , Omar (2014) Minimizing power losses by using improved genetic algorithm (IGA) for distribution network reconfiguration (DNR). Project Report. UTeM. (Submitted)

O

Ong, Yee Teng (2014) Positioning control of XY table. Project Report. UTeM. (Submitted)

P

Pauline , Ngoi (2014) Study and analysis of the gait and legs angle for the hexapod on the certain trajectory. Project Report. UTeM. (Submitted)

Q

Quak , Zhi Yuan (2014) Motion study of bionic leg using hydraulic motor. Project Report. UTeM. (Submitted)

S

Sa'adah , Daud (2014) Development of fault detection system for three-phase voltage source inverter (VSI). Project Report. UTeM. (Submitted)

Saidatina Aishah , Mohd Shah (2014) Modeling and simulation of direct torque control of brushless DC motor drives. Project Report. UTeM. (Submitted)

Saiful Anwar , Hasnawi (2014) Design and development an instrument for road width measurement. Project Report. UTeM. (Submitted)

Shakirah , Yusof (2014) Experimental study of single axis magnetic attraction force. Project Report. UTeM. (Submitted)

Sharifah Yuslinda , Syed Hussien (2014) PSO-tuned PID Controller for coupled-tank system (CTS) via priority-based fitness scheme. Project Report. UTeM. (Submitted)

Shitian , Ling (2014) Design and development of high accuracy shuttlecock launching system. Project Report. UTeM. (Submitted)

Siti Noratika , Othman (2014) A distribution network reconfiguration by using rank evolutionary particle swarm optimization for power losses minimization. Project Report. UTeM. (Submitted)

Siti Syahirah , Abdul Mutalib (2014) Power parameters monitoring system. Project Report. UTeM. (Submitted)

Syarifah Syakila , Syed Wahab (2014) Voltage Dip mitigation by controlling voltage and current DQ components. Project Report. UTeM. (Submitted)

T

Tan , Aik Choon (2014) The design and analysis of a rotary motion electrostatic actuator. Project Report. UTeM. (Submitted)

Tan , Chee Meng (2014) Design and development of stairs climbing trajectory for lower limb assistive device. Project Report. UTeM. (Submitted)

Teo , Ting Huan (2014) Design of a precision motion control for an upper limb of robotic arm. Project Report. UTeM. (Submitted)

Ting , Tze Ter (2014) Positioning control of ball screw system driven by DC motor. Project Report. UTeM. (Submitted)

Tiong , Lee Ung (2014) Effects of dust and temperature to the performance of solar PV system. Project Report. UTeM. (Submitted)

To , Shu Zi (2014) Low cost microcontroller based optimal control on photovoltaic energy optimization. Project Report. UTeM. (Submitted)

W

Wong , Chui Yee (2014) Autonomous wheelchair (mobile robot) via EOG signal recognition. Project Report. UTeM. (Submitted)