Effect of machining performance on recycle palm oil waste based material

Abu Samah, Muhammad Azri Hanafi (2022) Effect of machining performance on recycle palm oil waste based material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

	Text (24 Pages) Effect of machining performance on recycle palm oil waste based material.pdf - Submitted Version Download (329kB)
	Text (Full text) Effect of machining performance on recycle palm oil waste based material.pdf - Submitted Version Restricted to Repository staff only Download (1MB)

Abstract

The effect of machining performance on recycle palm oil based epoxy is not a new idea, but there have been very few studies about reinforcing oil palm fiber with epoxy composite. In this study, to analyze the machine performance and mechanical properties on recycle palm oil fibers using tensile testing, surface roughness and impact testing. The oil palm fiber were used and will be mix with epoxy resin composite to improve the mechanical properties of oil palm fiber. For this experiment, three ratios are available: 55Natural 45Epoxy (55N45E), 60Natural 40Epoxy (60N40E), and 65Natural 35Epoxy (65N35E). Following the process, the cutting procedure is carried out using a machine which is a CNC router machine. The collected data were analyzed using statistical analysis. Numerical computation and graphical demostration are carried out to observe the effect of machining and mechanical properties on recycle palm oil with epoxy resins. The results were obtained from the ratio of materials and parameter of machine will be effect on the result strength of materials.

Actions (login required)

View Item