Flame Imaging Using Combination Of LED Optical Sensor

Mohd Al-Amin , Mat Dris (2009) Flame Imaging Using Combination Of LED Optical Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

	PDF (24 Pages) Flame_Imaging_Using_Combination_Of_LED_Optical_Sensor_Mohd_Al-Amin_Bin_Mat_Dris_TK8360.O67.M34_2009_-_24_Pages.pdf - Submitted Version Download (282kB)
	PDF (Full Text) Flame_Imaging_Using_Combination_Of_LED_Optical_Sensor_Mohd_Al-Amin_Bin_Mat_Dris_TK8360.O67.M34_2009.pdf - Submitted Version Restricted to Registered users only Download (12MB)

Abstract

This project describes of the use of LED and optical sensor to reconstruct flame image distribution in furnace in using tomography method. It use an optical tomography method which consist of a LED as emitter and photodiode as receiver (sensor). The array of sensor will be installed at the jig/fixture which the laser will emit the light to the photodiode. The data of the sensor will be converted to the suitable digital form for computer processing. The computer is use to reconstruct a tomography image of the cross-section detected by the sensor. This system use an orthogonal projection which both number of emitter (laser) and receiver (photodiode) are the same and each pair of transmitter and receiver is arranged in a straight line and received signal only correspond to its emitter source. Besides that, this project also uses the Visual Basic (VB) software to reconstruct the image.

Actions (login required)

View Item