Attendance And Access Control System Using RFID System

Nor Amiyana, Mohd Alias (2011) Attendance And Access Control System Using RFID System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 pages) Attendance_And_Access_Control_System_Using_RFID_System_-_24_pages.pdf - Submitted Version Download (125kB)
	PDF (Full Text) Attendance_And_Access_Control_System_Using_RFID_System_-_Full_Text.pdf - Submitted Version Restricted to Registered users only Download (3MB)

Abstract

Based on the leading technology of microwave band long range radio frequency identification, this system is design to monitor attendance and control the access system using RFID system. This system can completely control the access to the area with automatic identification process and automatic attendance record system, with each vehicle is equipped with an active sticker/ tags which is previously registered on the system. The active sticker will send microwave signal constantly to the reader. When the reader installed near the gateway has receives the signal from the active sticker/tags, it will transmit the signal to the gateway controller (PIC 16F876A). Then the RFID system will verify the validity of the sticker. If valid, the time of arrival is recorded as part of the attendance and the relay on the controller will drive the gate open and permit the vehicle’s access. If the sticker is not valid, microcontroller will not function and the gate will remain closed. A camera will then take the picture of the affected vehicle. The images are saved in the database. A computer can be installed at the gate guard’s room to supervise the vehicles’ in/out, the time of arrival, the department of which the owner of the vehicle works in and the photograph of the vehicle.

Actions (login required)

View Item