Human head measurement study using kinect camera with three dimension cad software

A P Rajan, Sivanesshvar (2023) Human head measurement study using kinect camera with three dimension cad software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

	Text (24 Pages) Human head measurement study using kinect camera with three dimension cad software.pdf - Submitted Version Download (339kB)
	Text (Full text) Human head measurement study using kinect camera with three dimension cad software.pdf - Submitted Version Restricted to Registered users only Download (3MB)

Abstract

Anthropometry is that the systematic study of measurements of the physique. The physique size, shape and composition were measured using anthropometric measurements. This study tells how the measurements process were produced from CAD (Computer Aided Design) software because measurements of a person's anthropometry by using traditional method are complicated and takes lots of your time, direct body measurements using tape scale, spreading callipers and other hand measuring devices. There are several problems during taking the manual measurement because of the human error. This experiment was conducted on 30 male respondents. During the experiment, respondents will first be measured using tools such as calipers and anthropometers for conventional methods, after which CATIA and SOLIDDWORKS software is used for experimental measurements in 3D. As a result of the data, calculations, analysis and comparison between standard deviation, mean and percentile were performed. The use of computer-aided design (CAD) software, such as CATIA, can improve efficiency and accuracy when measuring the human body by reducing the need for manual labor and decreasing measurement time. This is because CAD software allows for the quick and accurate measurement of a 3D scanned image of the human body, which can be done in a fraction of the time it would take to manually measure the body using anthropometry tools. Additionally, the differences identified in this research can serve as a basis for future studies aimed at improving the measurement process. The final purpose of this project is to check anthropometric measurements from CATIA V5R19 Software and Solid works 2020 to compare it with manual measurements. The tactic employed in this study is CATIA V5R19 Software and Solid works 2020. Three dimensional (3D) data obtained from this study is from Camera Anthropometry System (3DCAS). This thesis target linear and circumferences measurement of head. This thesis also studied about the use of CATIA software and Solid work software for measurement that could quickly measure a human body that had been scanned into a 3D model. This thesis could been concluded that manual and 3D measurement were produced with a different reading.

Actions (login required)

View Item