Development of fiber optic sensor using different type of palm oil

Rosli, Muhammad Amiruddin (2021) Development of fiber optic sensor using different type of palm oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

	Text (24 Pages) Development of fiber optic sensor using different type of palm oil.pdf - Submitted Version Download (679kB)
	Text (Full text) Development of fiber optic sensor using different type of palm oil.pdf - Submitted Version Restricted to Repository staff only Download (2MB)

Abstract

Sensors for fiber optics have become one of the most prosperous and powerful people in the world applications of sensor and optical fiber technologies. In recent years, with the rapid development of microns or nanotechnology, the need for fiber optic sensors has become increasingly high. Having higher performance and flexibility, and occupying a small space is also one of the current fiber optic sensor trends. Fiber optic sensors have recently attracted a lot of attention due to its high sensitivity, fast detection speed, and ability to work in difficult conditions. This research is on the Optimisation Performance of Fiber Optic Sensors at different palm concentrations. Fiber optic sensors were developed to detect the concentrations of various types of oil palm. The objective of this project is to use optical fiber as a liquid sensor to detect various types of palm oil. This project requires an understanding, development and analysis of oil concentration sensors from optical loop fibers and needs to know how to perform fiber splicing, cutting and stripping for this purpose. There will be three samples of palm oil to be tested. Before each test, the fibers will be dipped into palm oil and then measured. In the line graph, each measurement will have a different result. The experimental findings will be explained in terms of sensitivity, correlation, and graphical determination coefficients, all of which depend entirely on the concentration of palm oil and the light source. At the end of the project, an optical liquid concentration sensor with high sensitivity readings was formed. Next, the results were analysed using the factorial design method. This will determine the type of palm oil concentration that has the optimum performance in terms of concentration.

Actions (login required)

View Item