Mould Flow Analysis Based Product Development For Plastic Injection Moulding Process

Ismail, Muhammad Adib (2019) Mould Flow Analysis Based Product Development For Plastic Injection Moulding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	Text (24 Pages) Mould Flow Analysis Based Product Development For Plastic Injection Moulding Process.pdf - Submitted Version Download (437kB)
	Text (Full text) Mould Flow Analysis Based Product Development For Plastic Injection Moulding Process.pdf - Submitted Version Restricted to Registered users only Download (4MB)

Abstract

The aim of this study is to evaluate the mould flow analysis based on the product development for plastic injection molding. Firstly, the plastic was design based on the product requirement that required from the survey form. By using computer aided design (CAD) from the Autodesk Inventor 2017 software, the plastic part were drawn in 3 dimension (3D) then its proceed to mould flow analysis for analysing the plastic part. Next, by using Autodesk Mould Flow Adviser 2018 software, it allows to generate virtual simulation how the plastic flow in the mould. From the simulation it can be analysed the most suitable parameter for injection moulding such as fill time, injection pressure, temperature at flow front, temperature variance, frozen layer, cooling quality and the defect that occur in the plastic part such as air traps, weld line and sink marks. In the simulation the material that used is Acrylonitrile butadiene styrene (ABS). Lastly, after the simulation was done,proceed to make mould design by using two plate mould base. The component of the mould base is making by using Autodesk Inventor 2017 by using FUTABA standard part mould base.

Actions (login required)

View Item