Design And Fabricate A Prototype Of Fire Safety Window Grille For Residential Unit

Md Ilias, Omar Dani (2017) Design And Fabricate A Prototype Of Fire Safety Window Grille For Residential Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text (24 Pages) Design And Fabricate A Prototype Of Fire Safety Window Grille For Residential Unit.pdf - Submitted Version Download (250kB)

Abstract

Fire is a chemical reaction involving the rapid oxidation or fuel burn. In case of fire on building, mostly resident being trap inside their house is due to the window or door grille installed permanent fixed on the wall. They have struggle and difficulties to open the window or door causes by the grille and cause the people drowned and burned to death. Helpers also struggle to rescue the victims because most of the grilles are locks from inside. From this point of view, this project is to fabricate a prototype of a window grille that can be unlocked or open easily when detecting a temperature of 70ºC and above. Furthermore, this project is to facilitate the victims getting out from house easily in the event of fire and to ease rescuers to enter the house. To fabricate the prototype of a fire safety window grille for residential unit, this project has been constructed a new design of window grille according to the appropriateness of the use of complementary features as fire safety equipment. The limitation of this project is to design and fabricate safety window grille for residential building only and the design specification is only for window grille and its sensors. Furthermore, the window grille will be unlock when the fire reach the temperature 70ºc and above. Lastly, the physical properties of window grille will be tested for failure analysis.

Actions (login required)

View Item