Egg Incubator With Bluetooth Controller Interface With Powered Android Device

Mohd Zulhilmi, Nasharuddin (2015) Egg Incubator With Bluetooth Controller Interface With Powered Android Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text (24 pages) Egg Incubator With Bluetooth Controller Interface With Powered Android Device 24 Pages.pdf - Submitted Version Download (472kB)

Abstract

Nowadays, a lot of technologies and system can be implement to improve the efficiency of the incubating process. Hatching process of the egg should be provide with the necessary heat and humidity in an incubator. Failure to provide proper temperature to the egg can give an effect to the egg health. The importance of temperature and relative humidity to be controlled by the android powered device is a reason for this project to be done. Three actuator that are heat source(bulb), fan and humidifier will acted on the measurement data from three parameters that are temperature, relative humidity and time period. Throughout the advanced technology, the Bluetooth interfacing is one of the excellent tools in transmitting and receiving ASCII and binary data between the devices that connected over the Bluetooth interface. The transmitter transmits the data to the receiver on the android powered device and display in the interface. When the three conditions occur during the process, the android powered device able to monitor and control the system. The system developed is focusing on the stabilized the temperature and the relative humidity according to the setting target temperature and the target relative humidity. The process stabilized is done most by the sensor and actuator inside the mechanical section of the incubator. The incubator setting can be set using either auto setup or manual setup directly from the incubator or the android device.

Actions (login required)

View Item