Items where Division is "Library > Final Year Project > FTKMP" and Year is 2021

A

Abd Rahim, Muhammad Hafiz (2021) A newly spiral channel mechanism to produce non-dendritic grains microstructure of aluminium alloy for semi-solid processing. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abd Wahid, Muhammad Haziq Hazman (2021) Recycle roving fibre kit for roving glass composites. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abdu, Muhammad Arief Izuddin (2021) Development of composite material for 3D printing filament using recycled polyethylene terephthalate (rPET) reinforced with sugar palm fiber (SPF). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahman, Muhammad Afiq (2021) Optimization of injection molding parameter for 60:40 virgin-regrind blended polypropylene plastic material. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abdul Razak, Asrul Hayat (2021) Development of chemically treated sugar palm fibre reinforced PLA composite through fused deposition modelling 3D printing. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Adzman, Amirul Aizat (2021) Autonomous maintenance for lathe machine (Model: Optimum D-420). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Azli, Azzhad Azib (2021) Optimization of injection moulding parameter for virgin polypropylene (PP) plastic material. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Daham, Mohammad Lukman Nurhakim (2021) Design and fabrication of marine boat propeller hub mould for investment casting. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Aplasamy, Rakeshkumar (2021) Low volume high mix manufacturing scheduling system with Odoo ERP open software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

B

Badrul Hisham, Khairunnisa (2021) Integrity assesment of HVAC and system support use in commercial building and offshore platform. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Chai, Tao Zhe (2021) Topology Optimization of enginemounting Bracket using Altair Inspire. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

H

Hadrawi, Izzuddin Fahmi (2021) Heavy lifting trolley for oil drum. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

I

Ibrahim, Mohammad Aidil Azreem (2021) Mechanical properties of newly developed polymer matrix composite – Wire Electric Discharge Machine(WEDM). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ibrahim, Muhammad Arif Afiq (2021) Effect of oncoming vehicle size on overtaking judgements from motorcyclist perspective. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Muhammad Syahir (2021) Design and develop mold for EM 8 standard test method for tension testing of metallic material. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ismail, Muhammad Redzuan (2021) Bathymetric study at Malacca River using compressed high-intensity radiated pulse device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Qalif (2021) Design and fabrication of marine boat propeller blade mould for investment casting. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

J

Jalal, Muhammad Hazrul Aiman (2021) Development of future bearing by optimised internal geometry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lye, Melanie Chuok Xin (2021) Research and development of kenaf core and gypsum for ceiling decorations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

Masri, Amin Irfan (2021) Comparison between multibody dynamics (MBD) rollover model and finite element (FE) rollover model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Ahmad Taufiq Baihaqi (2021) Experimental study on mechanical performance of coconut fiber/polyester panel with aluminium honeycomb. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Zakiyyuddin (2021) Design of Experiment (DOE) in the selection of natural fiber properties for the sound absorption system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hedzir, Mohd Hariz Azfar (2021) Design and fabricate portable waste engine oil filtration unit for automotive services centre. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Rehan, Mohammad Daniel (2021) Evaluation of spotweld failure model in Radioss to roof resistance test (FMVSS216). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sobry, Nur Sabarina (2021) Effect of laser engraving parameters on surface morphology and quality on galvanized steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zainudin, Salman (2021) Study on effect of nanofluid concentration on the performance of heat exchanger. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musa, Muhammad Hazim (2021) Design and development of gold bar stamping die. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Nik Khalid, Nik Muhammad Khairi (2021) Development of online condition monitoring system for integrated vibration assessment at factory. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Azmi, Muhammad Salman (2021) Shelter based design method of a lightweight and portable by using oil palm fiber reinforced honeycomb panel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Zainudin, Nur Zaim Aizat (2021) Strength analysis of ¾ jointer for joining 12’’ pipe in greenhouse. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Radin Mohamad Shamsul Zahr, Radin Puteri Farzana Natasha (2021) Improvement of product reliability through production process capability study at food and beverages industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Raju@Dorairaju, Rajadorai (2021) Optimize productivity through overall equipment effectiveness at food and beverage industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslan, Muhammad Iqbal Ayyub (2021) Urban smart farming system. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

S

Salim, Mohammad Zulhakimi (2021) Optimization of injection molding parameter for 80:20 virgin-regrind polypropylene (PP) plastic material. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Samsudin, Muhammad Syuaib (2021) Design and fabricate rollover warning device for tractor-semitrailer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syaharudin, Afiq Hamizan (2021) Extraction of hydroxyapatite using heat decomposition of fish by product for biomedical application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

Tomy, Meryl Anyie (2021) Research and development of fire retardant kenaf fiber for heat and fire insulator application. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

W

W Zamani, Wan Salwani (2021) Design and development of keep warm food delivery bag. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Y

Yii, Kevin Shun Jing (2021) Design and comparison study of Pelton turbine for torque power output. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yip, Yun Yu (2021) Develop future bio-based lubricant by utilising nan0-particles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zainal, Muhammad Khairul Asraf (2021) Enhancement of product quality through stability in gage repeatability and reproducibility at beverages industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zubir, Muhamad Amirul (2021) Effect of laser engraving parameters on surface morphology and quality on cement. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zulkifli, Mohd Zulkarnain Azwar (2021) Effect of laser engraving parameters on surface morphology and quality on ceramic tiles. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zulkifli, Muhammad Fikri (2021) Research and development of roof tile using Kenaf core and clay. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)