Items where Division is "Library > Final Year Project > FKP" and Year is 2014

A

Ab Razak, Mohd Hafrez Razi (2014) Electrophoretic deposition and annealing of poly (vinylidene fluoride)-graphite laminated composite film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Kadir, Norkhuzaimah (2014) Analysis on the robotics chip mounter performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Latib, Mohd Lutfan (2014) Development of system identification for piezoelectric patch actuator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Zammeri (2014) Machining simulation of composite materials using engineering simulation software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Wahab, Muhammad Hishamuddin (2014) Electrical Discharge Machining (EDM) of Reaction Bonded Silicon Carbide (RB-SiC). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Khairul Fahmi (2014) Analysis of applying ultrasonic system on FDM nozzle using ANSYS. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohd Amal (2014) The effect of cutting parameter on surface roughness during end milling of AISI D2 tool steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahman, Muhammad Nursyafiq (2014) Carbon nanofibers assisted conventional EDM on stainless steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahamad, Mohamad Naubfal (2014) A study on material management at an aerospace production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Zulhelmi (2014) Development of an automated guided vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Rabuan, Ahmad Fadhli (2014) Design of linear conveyor for parts feeding to COMAU articulated robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alaganathan, Mariappan (2014) Innovative die design for sheet metal stamping. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali, Nur Azarena (2014) Analysis for cast aluminium alloy titanium carbide. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anual, Mohd Tarmizi (2014) Design and analysis of welding fixture based on dynamic load condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

B

Baharom, Syazwani (2014) Electrochemical behavior of electroless ternary nickel (Ni-W-P) alloy deposit on iron substrate in 3.5WT % NaCI solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Che Nor, Che Muhamad Hamzah (2014) Study on cutting parameter on kerf width using WEDM of inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chen, Wei Keat (2014) Effect of substrate surface condition on thermal cycling behaviour of lead-free solders. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chia, Eileen Mei Ping (2014) Influence of parameters on the overcut and surface roughness of deep cavity feature using EDM die sinking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, See Ying (2014) Design and analysis of fins under uncertainty heat capacity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

D

Dorah, Norasimah (2014) Activated carbon and graphene based electrochemical capacitor in aqueous electrolyte. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

F

Firdaus, Muhammad 'Izzat Syahmi (2014) Effects of rubber seed shell microparticle addition on polypropylene/kenaf composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

H

Hakimi, Akhmal Hakim (2014) Complex additives influence of NiTe2 thin film synthesize by electrodeposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Nurul Hidayah (2014) Effect of biodegradable resin ration on the properties of resin onded sand for casting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

How, Whee Ching (2014) Tool for mapping manufacturing critical-path time in job shop environment. Project Report. UTeM. (Submitted)

I

Ismail, Ahmad Syukry (2014) Effect of bentonite and spent bleach earth (SBE) addition on the sintered properties of glass waste composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

J

Jaafar, Mohd Hairol Azaha (2014) Design and manufacture of recurve bow riser using fused deposition modeling (FDM) and fiber-reinforced composite material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaafar, Mohd Izwan (2014) Effect of chemical modification on tensile properties of thermoplastic reinforced comminution for out of condition aerospace grade carbon fiber prepreg waste. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jainudin, Mohd Irwan (2014) Process optimization for die manufacture : EDM die sinking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jalal, Mohd Azlan (2014) Design and development of portable charging station with sports apparel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Janin @ Abd. Karim, Nurul Fadzlina (2014) Design and development of a rattan baskets tool manufacturer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jantan, Nurul Hazimah (2014) Graphene and carbon nanotube based electrochemical capacitor in aqueous electrolyte. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jantan, Nurul Hazimah (2014) Graphene and carbon nanotube based electrochemical capasitor in aqueous electrolyte. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jasmi, Abdul Qayyum (2014) Design and simulation of material handling system in automotive industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kamaruddin, Muhammad Nur Azuan (2014) Eco design study of aluminium alloy 5052-H32 and aluminium alloy 6061 for recreational airboat. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarudin, Mohd Nizam (2014) A study of product design using an integration of conjoint analysis and TRIZ (Teoriya Resheniya Izobretatelskikh Zadatch) : a case study (product hanger). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairudin, Zulfadli (2014) Heat flow during cladding process of nickel based deposited material on cast iron substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kudsi, Muhamad Hanafi (2014) The priorities criteria of product design toward affective quality using technique for order preference by similarity to ideal solution (TOPSIS) and fuzzy TOPSIS : case study (toothbrush). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lau, Kiew Siong (2014) DMAIC approach to improve equipment efficiency. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau, Li Ying (2014) Design analysis of sheet metal welding joint based on transient thermal condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Mei Fang (2014) Effect of heat treatment conditions on aluminum alloy 6061. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

Mat Daud, Mohd Talmizi (2014) Performance of self-fabricated CNC machine when machining industrial product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Nasir, Mohamad Hayatunnufus (2014) Tribological properties of carbon fiber prepreg waste reinforced thermoplastic composites prepared via melt mixing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Nor Rashidah (2014) Redesign and efficiency analysis of small scale production line. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Nor Rizan (2014) Design of lab-scale pre-pregger machine for in house production of pre-preg material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Azmi, Helmi Affendi (2014) Modelling effect of cutter geometrical feature for shoulder milling of thin deflecting wall. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Noor Adami, Fazreena (2014) Improvement of cutter geometry to enhance machining performance for trimming CFRP composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Nawi, Zulhilmi (2014) Influence of solution process parameter to iron catalyst thin film and particle formation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Anuar, Mohammad Anis (2014) Development of a mini automatic vacuum cleaner. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ikhwan, Ishak (2014) The effect of carbon content (WT%) to the mechanical and thermal properties of recycle glass ceramic. Project Report. UTeM. (Submitted)

Mohd Kasim, Mohd Kamal (2014) Micro hole drilling by industrial CO2 laser. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khairul Ashraf , Ghazali (2014) A study on customer satisfaction using quality function deployment (QFD), kano approach and theory of inventive problem solving (TRIZ) toward product quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor, Mohd Khaidin (2014) Effect of sintering parameter in copper based alloys metal matrix composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Saffar, Seha (2014) Development of PLC based navigation system for mobile robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Saleh, Affendy (2014) To study the end of life coastal boat using design sustainability method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Suhaimi, Muhammad Helmy Haqqim (2014) Design and analysis of an instrument to test reading interpreting drawing skills. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Yusoff, Mohamad Nazrin (2014) Design and analysis of hand and wrist support device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zain, Amirul Hakimi (2014) Physical properties and energy absorption of epoxidized natural rubber/reclaimed rubber (ENR/RR) foam. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Muhammad Akmal (2014) Modelling effect of cutter geometrical feature for trimming CFRP composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zin, Mohamad Azuan (2014) Design analysis of thin walled aluminium 7075 aircraft parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zubir, Nik Mohamad Azren (2014) Influence of solution process parameter to cobalt catalyst thin film and particle formation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohmad Daud, Nur Rashidah (2014) Experimental investigation of stainless steel by using electrical discharge machine (EDM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Naim, Kasful Anuar (2014) Electrochemical behavior of electroless Ni-W-P alloy deposit on carbide substrate in 3.5wt% salt solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Sabri, Muhamad Rozaimi (2014) Development of mobile robot controller based on bluetooth communication system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Nor Mohd Uzair, Norsahperi (2014) Simulation of automation of pen capping process for EK300 at Sparkle Precision Sdn. Bhd. Project Report. UTeM. (Submitted)

Nordin, Mohamed Hafizuulamir (2014) Development of conceptual jigs for packaging tie plate using TRIZ approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nurasyikin, Araf (2014) Tensile behaviour under thermal degradation of thermoplastic elastomer PP/ENR filled reclaimed rubber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

O

Othman, Mohd Aidil (2014) Development of wireless voice activated robot system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Ramle, Zuraimi (2014) Performance of CVD coated carbide tool during turning titanium alloy Ti-6Al-4V ELI in dry condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rohanai, Reyanhealme (2014) Design and analysis of facilities layout for increase production in food industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosminahar, Siti Najiah (2014) Development of conceptual automatic car jack design using total design approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Sabri, Nur Hasrin (2014) Ergonomic design of computer numerical control lathe machine workstation. Project Report. Melaka, Malaysia, Melaka, Malaysia. (Submitted)

Samin, Nor Syamilah (2014) The evaluation of non-stochastic lattice structure on drop test application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Mohd Ghazali Kadir (2014) Fatigue life prediction model for fiber reinforced polymer composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syahibul Hafiz, Basir (2014) Improvement of drill geometry for drilling CFRP composite. Project Report. UTeM. (Submitted)

T

Tan, Choon Leong (2014) Implementing TPM approach in semiconductor company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tengku Mohamad, Tengku Ahmad Dzilkarnain (2014) Investigation based on design of experiment for woven composite deformation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

V

V. Segaran, Raguvaran (2014) Design of a noise insulator for ripple mill at kernel recovery plant in palm oil mill. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

Wan Ghazali, Wan Nurul Shahdan (2014) Ergonomic improvements on shock mitigating boat seats for yatcht cabin. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Mohd Azahar, Wan Mohd Yusoff (2014) Depth of cut analysis using plasma cutter for hybrid machine innovation. Project Report. UTeM. (Submitted)

Wan Zin, Wan Muhamad Farhan (2014) Development of vertical bandsaw machine and jig for customized plastic production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Shuw Fang (2014) Integrating biomimetic into product development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zamri, Mohd. Najib (2014) Development of mini CNC milling machine for small scale production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zubir, Mohamad Asyraf (2014) Design and analysis of feeder unit for oil palm fiber intake section. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkeflee, Muhammad Fikri (2014) Effect loading force and number of observation accuracy of aged inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Shahrul Imran (2014) Development of database for checking fixtures for automotive parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)