Items where Division is "Faculty of Manufacturing Engineering > Department of Engineering Materials" and Year is 2017

A

Abdullah, Muhammad Sharifuddin (2017) The Effect Of Thermal Processing On The Properties Of Reclaimed Carbon Fibre. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azly, Nur Hidayah (2017) Influence Of Chemical Modification On Energy Absorption Of Starch Modified Natural Rubber Based Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Chahit, Dyana (2017) Effect Of Different Pyrolysis And Annealing Temperature On Structural And Electrical Properties Of K0.5Na0.5(NbO)3 Thin Film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheong Jia, Pin (2017) The Effect Of Different Shapes And Perforated Hole Of Direct Recycling Hdpe Plastic As Reinforcement In Concrete Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choong Hui, Ling (2017) Mechanical And Physical Behavior Of Hevea Brasiliensis (Rubber Wood) Sandwich Structure Effect Of Cell Diameter Variation Of Hexagonal Core. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

J

Jamil, Noor Afizah (2017) Characterization Of Continuous Pineapple Leaf Fibre Reinforced Polylatic Acid Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kok, Fie Kie (2017) Formation Of Cobalt Coated TiO2 Nanotubes By Wet Impregnation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lee, Seih Chung (2017) Structural And Optical Properties Of Zinc Oxide Nanoparticles Synthesize Via Sol Gel Auto Combustion Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

Mohd Azam, Muhamad Ammar Farhan Maula (2017) Synthesis Of NaxCoO2 Thermoelectric Via Citrate-Nitrate Auto Combustion Reaction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Ali, Nursyuhada Ismah (2017) Preparation And Characterization Of Banana Trunk Derived Nanocellulose Prepared By Acid Hydrolysis Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Nordin, Mohd Najmi Naim (2017) Polymer Composite Coating Performance Evaluation On Carbon Steel In Mixed Brine Solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Rasmi, Noramalina (2017) Preparation And Characterization Of Polyurethane Filled Waste Tyre Dust (PU-WTD) Composite Foam For Noise Absorption Medium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

Wan Yusuf, Wan Norsyamila (2017) Porous Tricalcium Phosphate For Dental Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Teng Hui (2017) Preparation And Characterisation Of Natural Fiber Filled Asphalt Based Damping Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Yang Xin, Mei (2017) The Effect Of Cell Wall Thickness On Mechanical And Physical Properties Of Rubber Wood Honeycomb Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)